How to clean the iron from carbon deposits. Cleaning the iron from scale, carbon deposits and burnt fabrics How to clean the iron from rust

01.08.2020

Each housewife uses the iron almost every day, because it is necessary to put in order not only clothes for themselves, but also for the whole family. The soleplate of the iron gets dirty quickly. Fabrics of various structures are ironed. If the temperature regime is not observed, carbon deposits regularly appear on the sole. Especially when you have to iron a large amount of things after washing. To clean the soleplate of the iron, use both special and available products.

Synthetic fabrics require a special ironing regime, often after their processing black carbon deposits appear on the sole. The use of high temperature causes the fibers to melt. The smell characteristic of tissue burning can occur if the fabric is severely damaged. In some cases, it does not appear, but over time, the residual fibers on the sole burn and turn black.

If black spots appear near the hole, from which steam is released, you must take care of the compartment containing the water. Such contamination indicates the formation of scale, which darkens under the influence of high temperatures. If, when ironing white linen, yellow spots remain on the material or lime spills out when steam is emitted, then you need to replace ordinary tap water with filtered or distilled water.

Types of surfaces

Before you clean a dirty iron soleplate at home, you need to find out what material it is made of. Each coating requires an individual approach. Having picked up the wrong product, you not only do not clean the surface, but also risk spoiling it. Most often, the sole of irons is made of the following materials: teflon, aluminum, ceramics, stainless steel.

Teflon

For a Teflon-coated iron, gentle methods are used at home. The surface is easily damaged by mechanical stress.

Aluminum

The surface of this material should not be rubbed with metal brushes or products containing abrasive particles. Mild impact is recommended.

Ceramics

Stainless steel

It is particularly durable. Any means are allowed for cleansing.

Folk remedies

It is recommended to clean the surface on your own at home using the following tools at hand: salt, paraffin candle, hydrogen peroxide, vinegar, soda or nail polish remover. They are economical, easy to use, and all of the above components can be easily found in almost any home.

Salt

Table salt is suitable for cleaning almost any sole surface. The procedure for cleaning the sole with salt is carried out according to the scheme:

Sprinkle finely ground salt on a clean sheet of paper.
Plug in the appliance, heat the soleplate and walk over the sheet of salt.
By adding a little paraffin, you will soften the mechanical impact on the surface.

Salt has the ability to absorb impurities of any strength. Importantly, the method is not suitable for irons with Teflon soles.

Paraffin candle

The method is effective against soot that has formed recently. With heavily burnt material or old contamination, paraffin is useless.

Laundry soap is used as an alternative to paraffin, which is used to rub the hot surface. After the surface has cooled, wipe it thoroughly with a dry cotton cloth.

Hydrogen peroxide

Soak a cotton cloth or cotton pad thoroughly with the product. Process the sole until all carbon deposits are removed. The hydrogen peroxide solution does not harm the surface of any material, as well as the plastic elements of the device. No unpleasant odor appears when the surface is heated.

Vinegar

The tool is present in any kitchen, it is easy to use, it cleans effectively. Soak a cotton ball or clean cotton cloth thoroughly with vinegar. The surface is processed in a heated form. Apply as it evaporates.

Finish the procedure by ironing an old rag made from natural fabrics at the correct temperature.

Soda

This method does not require heating the device. The product is safe to use on any surface. Prepare a solution of baking soda and water for processing. Before the procedure, dissolve the substance in water in a ratio of 1 to 2 to obtain a thick mass. Rub the resulting gruel into the dirty surface. Leave the product to work for 10 minutes. The soda is removed with a clean damp cloth, wipe dry.

Nail polish remover

The tool is used with caution. With a high content of acetone in the liquid, there is a risk of damage to the plastic elements of the iron. The product is effective for adhesion of polyethylene. Rinse the sole thoroughly with water after the procedure.

Matchbox

The sticker on which matches are lit has the ability to clean carbon deposits from the sole of the iron. Using small efforts commensurate with the strength of the dirt, wipe off the carbon deposits. Until completely clean, wipe the surface with a damp cloth or cotton pad.

Professional remedies

The special preparation comes in the form of a pencil. Effective against light or heavy soiling. You can buy a pencil at almost any household chemical store. Read the instructions for use carefully before use. Typically, the main activities are as follows:

Plug in the appliance.
Disconnect the iron from the power supply.
While the surface is still hot, run the pencil over the sole of the appliance.
The dirt will roll off the sole along with the product. Do not keep the device upright for a long time.
To remove crayon residue from the soleplate, plug in the iron and use steam to iron an old, clean, natural cloth rag.

Use a pencil very carefully, as when the product flows into the holes, damage of a different nature can occur in the sole. Do not choose a product that contains abrasives. The most effective pencil, which contains ammonia.

It is easier to prevent contamination than to clean it up. It is important to follow the ironing rules for all types of fabrics. It is recommended to iron clothes according to the following temperature standards:

flax - 200-230 ºС;
cotton - 160-185 ºС;
wool - 140-160 ºС;
silk - 110-130 ºС;
viscose - 80-120 ºС;
guipure - 50-80 ºС.

Iron on an ironing board, if not, lay a blanket or towel on any flat surface.

Prevention and adherence to basic ironing rules can reduce the frequency of cleaning the sole. The basic rules are as follows:

Adjust the temperature according to the type of fabric. If the item has fabrics of various materials, then carefully monitor the set mode... Check the labels on the products for the recommended temperature.
Pour only purified water into the water tank, which will prevent the appearance of scale. Distilled water is perfect.
Wipe the soleplate thoroughly after each use.

These methods will not only prevent the appearance of stains, damage to products, but also reduce the likelihood of a quick exit from the iron.

How can you clean your iron at home from scale and carbon deposits

Every hostess knows that scale and carbon deposits often form on the iron, which not only affect the appearance of the device, but can even damage or stain things.

To prevent this from happening, you need to be familiar with the rules for using the iron and use different modes for certain types of fabric.

How can you clean your iron at home?

Unfortunately, even with proper use, the iron can develop plaque due to the hardness of the water and synthetics. Scale inside the appliance and rust make the work of the hostess very difficult, making ironing a laborious and almost impossible task. Such an iron can ruin all white things, and all kinds of modern and improved powders and detergents will not be able to cope with the terrible pollution. Not every family can afford to buy a new household appliance every time - this is an expensive and completely unnecessary task, because the old one can be cleaned.

Important to remember! For ironing silk and synthetics, the iron should not be too hot, and it is best to iron things made of wool by putting wet gauze on them.

If you need to clean the iron from limescale and carbon deposits, but you do not have specially designed products in your apartment, then you should not immediately run after them to the store. You can clean the device with the help of those things that every good housewife has at hand:

Vinegar. The iron must be turned off, because this product evaporates quickly. You need to moisten a rough cloth with vinegar and simply rub the dirty surface of the device. For a faster effect, add ammonia to it. If you have not been able to clean the iron the first time, then you can slightly heat it, and only then rub it with a cloth dipped in vinegar. Using this method, you should understand that inhalation of vinegar vapors is hazardous to health, therefore, this procedure is best done outdoors or in the garage, or at least at home, but with fully open windows.
Salt. It will greatly help to get rid of rust and plaque on the surface of the iron. A large amount of salt should be poured onto clean paper or cani and the heated device should be rubbed strongly. It is worth remembering that this method can harm Teflon-coated irons.
Paraffin wax. This mixture gives the best result than the previous one. You need to do everything the same way. Using this method, you can easily remove all irregularities and small dents on the iron. Do not forget that it is better not to use the newspaper in cases 2 and 3, because printing ink may remain on the iron.
Hydrogen peroxide. Moisten a piece of cotton wool in it, then completely wipe the surface of the iron. The most important thing is that you will not feel any unnecessary and unpleasant odor. If you don't have hydrogen peroxide on hand, you can use a nail polish remover or acetone.
Lemon acid. It should be diluted in a small amount of water, soaked in unnecessary cloth in the resulting solution and the iron should be cleaned with a cloth.

How to descale the inside of a steam iron at home?

Most people are oblivious to the manufacturer's recommendations for water to be put into a steam iron. It must be necessarily distilled, otherwise the service life of a household item is significantly reduced.

Due to ordinary water from the tap, scale appears inside the device, therefore, the channels that remove the vapors are clogged. Thus, the technique begins to stain the clothes. It is very convenient that some models are equipped with self-cleaning, so there is no need to worry about the normal operation of the device and the integrity of things, but such irons are expensive. If you don't have such an electrical appliance, here are some tips for descaling the inside:

In a small saucepan, boil water and stir citric acid in it, pour the resulting liquid into the iron and turn it on to a very high temperature. After heating, press the steam release button several times. Turn off the device and wait until it has cooled down a little, wipe off the remaining citric acid with a paper towel. This method is suitable for those housewives who have very little scale inside the iron.
Warm up the iron well, then unplug it and set it securely so that the soleplate is on top. Pour a few drops of Cillit into the steam outlet and wait 10 minutes. Later, wipe off all dirt with a sponge and rinse the iron well.
If, after ironing, rusty stains remain on the linen, then Antinakipin will help you. The product should be diluted with water and poured into the iron by plugging it in. After warming up, turn off the device and leave for 30 minutes. At the end, rinse the iron well from rust and scale.
Boil water and pour vinegar into it. Place the iron in a bowl or wide saucepan and pour the resulting liquid along the level of the sole. Let the base of the appliance stand for several hours. Then gently wipe the iron and remove dirt from it.

An important point! Never use wire brushes or materials that can easily damage the surface of the iron. The cooled iron can be cleaned with a nylon washcloth, and the hot one can be cleaned with a terry cloth and wood scrapers.

How to clean the sole of the iron from carbon deposits at home?

If your electrical appliance starts to leave brown spots on your clothes, then you should definitely clean it. This is done very simply, much easier than watering flowers and hammering nails. The most important thing is the availability of the necessary funds and a thoughtful approach to business. There are several ways to clean the iron from carbon deposits at home:

If your iron is in good condition, but there is a small amount of carbon on the sole, then ordinary toothpaste can cope with it. It should be slightly applied to a wet cloth and wiped off the device. Finally, be sure to dry the soleplate dry and remove all dirt.
They have invented an excellent invention - a pencil, with which you can easily remove carbon deposits from the surface of the iron. You just need to read the instructions and use this thing correctly.
Pour salt on a piece of paper and drive it with a heated iron, pressing with all force. This method is called "mom's", because many housewives get rid of carbon deposits in this way.

There are several rules to follow when cleaning the ceramic soleplate of your iron:

do not use scratching materials;
under no circumstances use metal tools or knives to clean the iron;
choose methods without mechanical detachment of carbon deposits (dissolve it).

Tip of the day! To make the iron less dirty, it is advisable to wipe it with a damp cloth or gauze after each ironing.

How do I clean a burnt-on Teflon iron?

It is not difficult to clean a regular iron. However, Teflon coated instruments are very delicate and discreet. These irons require a more careful and careful attitude to themselves.

If the iron is a little dirty, a regular cloth moistened with water will help. You just need to wipe the surface of the device with it.
If the first method did not help, then the iron can be wiped with a cotton pad or a piece of cloth dipped in vinegar and ammonia. In this case, the iron must be warm.
If any material (plastic, polyethylene, etc.) is burnt to the surface of the iron, then it is categorically impossible to tear it off by force or with a knife or other sharp object! Wait until the iron is dry and wipe the coating with cotton wool dipped in acetone or a liquid that removes varnish.
If there are small irregularities on the surface of the iron, then this situation can be corrected with paraffin. Mix the chopped candle with fine salt, spread it all on a cloth, and cover it with a paper towel. Then iron the structure with an iron (the temperature of the device should not exceed 120 degrees). Finally, rub the sole well with a clean piece of cloth.

How to clean an iron at home: video

There are many good methods on how to clean your iron at home. There are both professional formulations developed at household chemistry enterprises and effective folk remedies that can be used to eliminate burn marks and dark plaque on the sole of the device.

How to clean the iron from carbon deposits

If the house does not have professional tools for cleaning carbon deposits from the sole of the iron, you should use such improvised substances as:

vinegar;
hydrogen peroxide;
ammonia;
soda;
pencil, etc.

Each tool has its own characteristics of application, which must be taken into account in order to obtain the best result. These compounds are gentle, so they can remove plaque even from Teflon and other surfaces.

Vinegar

This is the most common remedy used to remove plaque from the iron. It is important to remember that you should not warm up the appliance before cleaning. You can quickly scrub dirt off with table vinegar and cold soles. It is enough to moisten a sponge with it and carefully treat the surface.

Sometimes it becomes necessary to use a reinforced composition to clean the iron from carbon deposits at home. To prepare the cleaner, vinegar should be mixed with ammonia in a 1: 1 ratio. Then a piece of soft dense cloth should be moistened in the solution. The size of the piece of material must be suitable to wrap around the dirty soles of the appliance.

Ammonia

The iron can also be cleaned using ammonia. This product can be used undiluted. The cotton fabric is moistened with alcohol. Then the device is warmed up and the sole is thoroughly cleaned with a dampened cloth.

Hydrogen peroxide

To remove carbon deposits, 3% hydrogen peroxide is used. It is necessary to soak a cotton swab with it, and then wipe the heated surface with it. Then the cotton fabric is ironed. The procedures are repeated if necessary. Peroxide dissolves plaque, which facilitates its rapid removal.

Pencil

You can also clean the surface of the iron with a pencil lead. You need to grind it to a powder state. After that, it should be poured onto paper and a heated device should be placed on top of it. After a minute, the device is removed and used to iron the cotton fabric. Repeat the procedure if necessary.

Other means

You can clean the sole of the iron from strong dirt with a composition that includes ammonia and lemon juice. First, you need to mix about ¼ cup of lemon juice with 2-3 drops of ammonia. The fabric soaked in this composition must be laid on the surface and left for 12 hours. Then you can clean the carbon from the soleplate.

You can also clean the iron at home with soda. To make a cleaning compound, you need to mix 2 tsp. powder with 1 tbsp. l. table vinegar. The resulting foaming paste should be applied to the heated sole. When the surface has cooled down a little, the remaining dirt should be wiped off with a paste.

Carbon deposits from the soles, which have arisen when the fabric is burned, can be easily removed with paraffin. A quality paraffin candle should be wrapped in 1-2 layers of cotton fabric. The iron is heated and rubbed with candles. Melting paraffin removes even stubborn dirt well.

Toothpaste also helps to remove carbon deposits from the iron. It is applied to the fabric, and then carried over it with a device, making circular movements. In this way, residual dirt can be removed after cleaning with other methods.

Professional products for irons

The soft Teflon coated iron soles are best cleaned with professional cleaning products. This will reduce the risk of damage to the coating. There are many good professional tools out there. Special pencils and "Shumanit" are considered especially effective. They are distinguished by their low cost and ease of use.

We clean with Shumanite

Shumanite is available in the form of a spray. When using this product, care must be taken, since contact with the eyes can lead to extremely undesirable consequences. First, the appliance heats up. Then the sole is sprayed with a spray. After 2-3 minutes of exposure, the treated surface should be cleaned with a soft cloth.

Special pencils for cleaning irons

To quickly restore the cleanliness of the sole, it is recommended to use special pencils. This is not difficult to do. First, the appliance is heated to the maximum temperature. Then you need to rub the surface with a pencil. It melts quickly when exposed to high temperatures.

The pencil should dissolve at half its original size. This agent is quite caustic and, when combined with high temperatures, can remove even intense dirt. The rest of the pencil is left on the sole for 2 minutes. Then use the appliance to iron a rough cotton fabric.

Cleaning methods for durable coatings

Even harsh and abrasive products can be used when cleaning tough titanium, steel, sapphire and enamel coatings.

To clean irons with these types of soles, you can use a powder or toothpaste containing abrasive particles. The device needs to be slightly warmed up. The surface should be warm, but not hot. With a brush, on which 2-3 cm of paste are previously applied, you need to clean the sole. Wipe the surface with a damp cloth to remove any residual paste. Then it is carefully rubbed with a dry cloth.

In addition, you can remove heavy carbon deposits with a mixture of baking soda and detergent in a 2: 1 ratio. The gruel is applied to a cold surface. Then the surface is cleaned with a sponge. Residues of the product and dirt are removed with a damp cloth.

Clean hard surfaces with salt. To do this, salt is poured onto the cotton fabric so that it is completely covered. Then you need to warm up the device as much as possible and put it on the salt with the sole. After 2-3 minutes, remove the parting, brush off the adhered salt from it, and then iron the hard cotton cloth with it. For the best result, all actions must be repeated.

If carbon deposits have formed on the surface due to contact with synthetics, the contamination can be removed in another aggressive way. First, the remnants of burnt synthetics should be removed from the heated surface. Then, with the device heated to the maximum, iron the old coarse towel. This will remove any remaining dirt.

How to care for your iron and prevent carbon deposits

When using the device, you should not deviate from the manufacturer's recommendations regarding the features of operation. It is necessary to monitor the temperature regime of the device when processing silk and synthetic fabrics. Only clean things can be ironed. Do not leave the appliance on the fabric for too long while ironing.

After each use, when the surface temperature has dropped, it should be wiped with a damp cloth. If a thorough cleaning is required, choose a product based on the type of coating so as not to damage it.

Uniform heating, easy sliding, non-stick properties - all these are the characteristics that work surfaces have. However, even the highest quality outsole can be covered with a dark coating. This usually occurs due to the wrong choice of temperature conditions or long-term holding of the device on one tissue site. Let's figure out how to clean carbon deposits from the iron using home remedies.

Dirt on the iron is formed from melted or burnt fabric fibers, textile dyes and limescale particles. Before figuring out how to clean the iron from adhering fabric, let's figure out what it is made of.

Traditional materials are aluminum and stainless steel. They warm up quickly and are relatively inexpensive. However, fabric fibers, especially synthetic and woolen fibers, easily adhere to them. To solve this problem, manufacturers apply various coatings to the sole.

The main ones are:

Titanium. Pros - durable, resistant to mechanical damage and scratches. Cons - it takes a long time to warm up, it is expensive.
Ceramics and glass ceramics. Pros - provide easy sliding, quick cleaning, uniform heating. Cons - fragility, tendency to chips, cracks.
Teflon. Pros - artificial fabrics do not stick to it, carbon deposits do not form. Cons - scratches easily.
Sapphire (mineral chips). Pros - resistance to damage, can be cleaned with a metal brush. Cons - high price.
Enamel. Pros - durable and smooth finish. The disadvantage is the high cost.

Many brands combine different types of coatings, such as titanium with sapphire or ceramic with silicon. In addition, some models are supplied with overlays for delicate materials to protect them from burning or melting.

Important: In order not to think about how to clean the iron from the burn on the sole, and to avoid its appearance, things made of synthetics, silk, wool, viscose and other "capricious" fabrics should be ironed through gauze or cotton napkin.

How to clean the soleplate of an iron

Pencil

When figuring out how to clean the burnt fabric from the iron, you should use a special pencil (crayon). They are produced by several companies (Typhoon, Diaz, Ream, Cinderella), are sold in hardware stores and are inexpensive. The pencil is accompanied by instructions for use, which indicate the types of soles that can be processed. As a rule, the product is suitable for all surfaces.

Application rules:

Heat up the iron, unplug it.
Gently rub the dirt with a pencil, not pressing too hard on the surface or touching the sole with your fingers.
After a few seconds, when the carbon deposits have dissolved, run the iron over the cotton cloth.
When cleaning the steam iron, activate the steam release option and then clean the holes with a dry cotton swab.

The heat generated when using the pencil produces an unpleasant odor. Cleaning is best done near an open window. It is advisable to wear gloves on your hands. The same rules apply when using any other chemicals (ammonia, vinegar, solvent).

Vinegar

When figuring out how to clean the iron from burnt fabric, if it is covered with Teflon or ceramics, it makes sense to resort to using 9% vinegar. If the contamination is new, then it is necessary:

Dilute the substance in water - 2 tablespoons per 1 glass.
Dip a cotton swab or cloth into the liquid and wipe the heated, but not hot, sole.

It is better to clean old burns with a cloth soaked in concentrated vinegar. An old waffle or terry towel is ideal for this. It is recommended to use cotton swabs or toothpicks wrapped in cotton for processing holes. At the end, you need to run a hot iron over a damp cloth.

Ammonia

When thinking about how else to clean the iron from carbon deposits and not damage its surface, you should use ammonia. Recipes:

table vinegar and ammonia in a 50/50 ratio;
juice of one lemon and 2-3 drops of ammonia;
ammonia in pure form.

The scheme for cleaning the iron from carbon deposits at home is the same: you should treat the hot sole with a cloth soaked in liquid. In case of stubborn dirt, you can leave the cold iron overnight on a rag soaked in solution, and wipe it with a dry cloth in the morning.

Hydrogen peroxide

In search of a solution to the problem of how to clean the iron from carbon deposits at home, it is worth resorting to using hydrogen peroxide or its dry analogue - hydroperite tablets. Algorithm of actions:

Heat the iron.
Wipe the work surface with cotton wool soaked in peroxide, or treat it with a tablet. When using hydroperite, remove the rest with a cloth.
Iron unnecessary fabric.

Other means

Faced with the problem of how to clean the iron from carbon deposits, you can resort to one of the following methods:

Rub a hot iron with laundry soap. After cooling down, clean it with a damp cloth. The method is suitable for fresh dirt.
Treat carbon deposits on a cold iron with cotton wool soaked in nail polish remover or paint thinner.
Heat the iron and clean the dirt with a box of matches - the plane on which the sulfur is applied.
Rub a warm work surface with a paraffin candle. The appliance should be placed vertically on a pallet to allow the melted wax to flow into it. Iron the rags.
Apply a special glass ceramic cleaner to the ceramic soleplate. Remove it with a soft damp cloth.

The iron is an irreplaceable helper for the hostess. Everyone knows that it cannot be left unattended and different fabrics need to be ironed at a certain temperature. But in a hurry it is forgotten, soot forms on the surface of the sole. It becomes impossible to iron. How to clean the iron from carbon deposits and not damage the equipment?

It is not difficult to clean the iron at home from scale and carbon deposits, cleaning products are available to everyone. It is forbidden to use abrasive products, they damage the equipment.

The device must be cleaned disconnected from the power supply!

Vinegar

You will need vinegar to clean the heating element. Natural - apple, wine - will not work, there are natural sugars that pollute the sole of the device.

Vinegar is used when yellow or brown spots appear. The acid dissolves salt deposits, scale, formed during steaming of tissues.

Required:

vinegar 9%;
cotton swab;
cotton pad.

Cleaning method:

heat up the device;
unplug from the outlet;
soak a cotton pad and stick with vinegar, squeeze out the excess;
wipe the sole with a cotton pad, go through small parts with a stick;
turn on the network;
iron the cotton fabric.

If the surface is very dirty, soak a cotton cloth with a vinegar solution and iron until the dirt disappears.

The material must be natural. Otherwise, you will get fresh traces of burning on the sole.

Use citric acid as an alternative to vinegar. Chemically pure substance, not citrus juice. Lemon contains sugar. Its use will increase surface contamination.

Dissolve the acid in water until it tastes richly sour and treat the contaminated surface.

Hydrogen peroxide

During decomposition, hydrogen peroxide releases atomic oxygen, a strong odor is possible. It will help to clean and disinfect ceramics or Teflon coating.

Saturate a cotton swab or thick cloth with 3% hydrogen peroxide. Wipe the dirty cold surface thoroughly. No need to rinse or rinse.

Ammonia

Ammonia is not used in its entirety. To clean the soles of the appliance, ammonia is mixed in equal proportion with vinegar.

Treat the cold surface of the device with the resulting liquid. Leave on for 2-3 minutes. Wipe the sole with a waffle napkin, sponge.

Work with ammonia should be in a ventilated area. Do not inhale vapors and do not allow the solution to come into contact with the eyes and mucous membranes!

Other methods

Table salt will help to clean the surface of the iron at home from scalding. The method is not suitable for Teflon surfaces!

Pour fine salt on a sheet of paper. Warm up the device and iron the sheet. Baking soda powder works the same way.

A budget detergent for cleaning the iron from burn-in is a laundry soap. To wipe the stain, heat the device and wipe it with dry soap. Leave to cool. Then wipe the sole with a dry cloth. Remove the rest of the soap with a damp sponge.

Toothpaste is a versatile gentle cleanser. Apply the paste to the sole. Heat up the appliance. Remove toothpaste with a damp cloth. Put in steaming mode. Remove residual cleaning agent from the surface.

Overview of special tools

Special chemical preparations for cleaning from burning do not require specialized skills.

It is enough to read the manufacturer's instructions.

Pencil Bubble Ice - contains ammonium nitrate, adipic acid, citric acid. Warm up the device to a temperature of 130 degrees or set the “wool” mode. Switch off the device. Apply a burner cleaner. Wait until it melts and wipe the soleplate thoroughly with a dry cotton cloth.
Pencil Tefal XD900100 - suitable for all types of surfaces. The composition and method of use are not indicated on the package.
Iron care set WPRO IRON KIT - includes descaling liquid and a pencil for treating the heating element. Manufacturer Italy. Approved for cleaning aluminum soles.

What products can harm the coating of the iron

Now manufacturers produce equipment with various types of coating - stainless steel, ceramics, non-stick Teflon-based.

Any surface will be damaged by the following actions:

abrasives - what are included in cleaning products for tiles or enamel surfaces. After use, cracks remain, and the device stops sliding on the fabric;
iron brushes - an abrasive option;
corrosive acids and alkalis - ceramics and teflon are inert materials, under them are metal surfaces. Enough cracks and corrosive substances will penetrate into the internal structures of the device and cause corrosion. After a while, the device will have to be thrown away;
rinsing under running water - gets on the internal components of the device. Short circuit is ensured;
paraffin - there is a possibility that oil refined product in liquid form gets inside the device or remains in the steam outlet.

It is easy to prevent burning: distract yourself or set the wrong temperature on the regulator, but it is difficult to wash the sole!

Similar articles: